Rear Console Removal/Installation

REAR CONSOLE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Upper panel Upper Panel Removal/Installation

b. Shift knob (MTX) Service and Repair

c. Shift panel Shift Panel Removal/Installation

d. Decoration panel (See Decoration Panel Removal/Installation.)

e. Center panel lower Center Panel Lower Removal/Installation

3. Disconnect the auxiliary jack connector and accessory socket connector.

4. Remove the screws A, B and screw C.






5. Remove the storage box and mat.






6. Open the console lid and remove the screws D.






7. Pull the rear console in the direction of the arrow in the order of (1), then detaching clip E.






Vehicles Without Rear Ventilator Grille

1. Pull up the rear console in the direction of the arrow (2) shown in the figure, move the rear console in the direction of the arrow (3), and remove it avoiding the parking brake lever.






2. Install in the reverse order of removal.

Vehicles With Rear Ventilator Grille

1. Remove the clip F and hook G.






2. Remove the rear console panel.

3. Remove the rear fan switch connector.

4. Remove the screw H.






5. Pull up the rear console in the direction of the arrow (2) shown in the figure, move the rear console in the direction of the arrow (3), and remove it avoiding the parking brake lever.






6. Install in the reverse order of removal.