Navigation System: Application and ID

SUPPLIER IDENTIFICATION PROCEDURE [CAR-NAVIGATION SYSTEM]

NOTE:
- The supplier can vary with the unit. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Side wall Side Wall Removal/Installation

b. Selector lever knob (ATX) Service and Repair

c. Shift lever knob (MTX) Service and Repair

d. Center console (with rear vent) Center Console Removal/Installation

e. Front console Front Console Removal/Installation

f. Climate control unit Climate Control Unit Removal/Installation - Full-Auto Air Conditioner

g. Car-navigation unit Service and Repair

4. Verify the supplier by referring to the label attached to each unit.

Verify Using the Diagnostic Assist Function

1. Launch the diagnostic assist function. Diagnostic Assist Function - Car-Navigation System

2. Press the "Diagnostic assist code input switch", and input the diagnostic assist code "06".






3. Select "ENTER".

4. Identify the supplier code by referring to the display.










5. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.

6. Press the POWER/VOLUME switch to release the diagnostic assist function.