C-Pillar Trim Removal/Installation

C-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
a. Rear package tray lid Service and Repair

b. Sub-trunk Service and Repair

c. Third-row seat Third-Row Seat Removal/Installation

d. Rear scuff plate Rear Scuff Plate Removal/Installation

e. Trunk end trim Trunk End Trim Removal/Installation

f. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

g. Cargo compartment light Service and Repair

h. Trunk side trim

i. Rear header trim Rear Header Trim Removal/Installation

j. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

2. Partially peel back the seaming welt.

3. Remove the fasteners.






4. Remove clips A, and pins B using a fastener remover.

5. Remove the belt bezel, and remove the third-row seat belt from the C-pillar trim.

6. Slide the C-pillar trim to the vehicle front and remove clips C from the C-pillar trim.

7. Remove the C-pillar trim.

8. Remove clips C from the body, then install it to the C-pillar trim.

9. Install in the reverse order of removal.