Discharge Headlight Control Module Removal/Installation

DISCHARGE HEADLIGHT CONTROL MODULE REMOVAL/INSTALLATION

WARNING:
- Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always refer to the discharge headlight service warnings. Service Precautions

1. Remove the battery cable.

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the front bumper. Removal and Replacement

4. Remove the front combination light. Service and Repair

5. Remove screws.






6. Disconnect the discharge headlight control module connector.

7. Remove the discharge headlight control module.

8. Install in the reverse order of removal.

Discharge headlight control module connector removal note

1. Remove the screw shown in the figure.






2. Disconnect the discharge headlight control module connector.