Keyless Antenna Removal/Installation

KEYLESS ANTENNA REMOVAL/INSTALLATION

LH, RH

1. Disconnect the negative battery cable. Removal and Replacement

2. Remove the door trim. Door Trim Removal/Installation

3. Remove the screws.

4. Disconnect the connector, then remove the keyless antenna.






5. Install in the reverse order of removal.

Rear

1. Disconnect the negative battery cable. Removal and Replacement

2. Remove the nuts.

3. Disconnect the connector, then remove the keyless antenna.






4. Install in the reverse order of removal.

Instrument panel

1. Disconnect the negative battery cable. Removal and Replacement

2. Remove the scuff plate. Scuff Plate Removal/Installation

3. Remove the side panel. Side Panel Removal/Installation

4. Partially peel back the floor covering so that the foot support can be removed.

5. Remove the foot support.

6. Disconnect the connector, then remove the screws.

7. Remove the keyless antenna.






8. Install in the reverse order of removal.

Center

1. Disconnect the negative battery cable. Removal and Replacement

2. Remove the console. Console Removal/Installation

3. Remove the side wall. Side Wall Removal/Installation

4. Remove the console panel. Console Panel Removal/Installation

5. Remove the clips.

6. Disconnect the connector, then remove the keyless antenna.






7. Install in the reverse order of removal.

Rear No.2

1. Disconnect the negative battery cable. Removal and Replacement

2. Remove the console. Console Removal/Installation

3. Remove the back trim. Back Trim Removal/Installation

4. Remove the nuts.

5. Disconnect the connector, then remove the keyless antenna.






6. Install in the reverse order of removal.

Trunk

1. Disconnect the negative battery cable. Removal and Replacement

2. Remove the trunk side trim.

3. Remove the nuts.

4. Disconnect the connector, then remove the keyless antenna.






5. Install in the reverse order of removal.