Knee Bolster Removal/Installation

KNEE BOLSTER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Driver-side front scuff plate Front Scuff Plate Removal/Installation

b. Driver-side front side trim Front Side Trim Removal/Installation

c. Rear console (See. Rear Console Removal/Installation)

d. Shift lever knob (MTX) Service and Repair

e. Hood release lever Service and Repair

f. Side wall Side Wall Removal/Installation

g. Front console component Front Console Component Removal/Installation

h. Driver-side lower panel Lower Panel Removal/Installation

3. Remove the bolts and nut.






4. Remove the knee bolster.

5. Install in the reverse order of removal.