TC23 - Check Shift Solenoid Circuit Continuity

- Key "OFF".

- Transmission 12-pin connector disconnected.

- Install breakout box or 4EAT Tester, leave Powertrain Control Module (PCM) disconnected.

- Measure resistance between suspect shift solenoid test pin at the breakout box and shift solenoid circuit at transmission 12-pin vehicle harness connector.

- Is resistance less than 5.0 ohms?

Yes -- Go to TC24. TC24 - Check Shift Solenoid For Short to Power In Transmission

No -- Service open circuit. Reconnect all components. Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)