13 62 615 Replacing inlet pressure sensor (N14, N18)

Necessary preliminary work:  Remove INTAKE SILENCER HOUSING 

Unlock connector (1) and remove.

Release screw.

Detach inlet pressure sensor (2) from intake plenum.

Installation note: 

• Check sealing ring, replace if necessary.
• Tightening torque 13 62 5AZ .
  Fig 1: Identifying Locating Suction Pressure Sensor Screw, And Connector

  Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Check stored fault messages.

Delete fault memory.