Engine Control System

P0100 - P0135:

P0136 - P0500:

P0505 - P1795:

Diagnostic Trouble Code Chart (Revised):

NOTE: All Trouble Code Diagnostic Procedures and Diagnostic Trouble Code Charts have been updated to show the revised information.

NOTE: Do not replace the PCM until a through terminal check reveals there are no short/open circuits.

NOTE: Check that the PCM ground circuit is normal before checking for the cause of the problem.

NOTE: After the PCM detects a malfunction, a diagnostic trouble code is recorded the next time the engine is started and the same malfunction is re-detected. However for items marked with a "*", the diagnostic trouble code is recorded on the first detection of the malfunction.

NOTE: Sensor 1 indicates the sensor mounted at a position closest to the engine, and sensor 2 indicates the sensor mounted at the position second closest to the engine.

NOTE: Bank 1 indicates the right bank side cylinder, and bank 2 indicates the left bank side cylinder.