Individual Component Service

INDIVIDUAL COMPONENT SERVICE

WARNING:

- If heat damage occurs during paint work, remove the SRS-ECU, the air bag modules, the clock spring, front seats, impact sensor and the seat belt with pre-tensioner. Recheck the SRS system operability after reinstalling them.
- SRS-ECU, air bag module, clock spring, front seats, impact sensor: 93° C (200° F) or more
- Seat belt with pre-tensioner: 90°C (194° F) or more
- If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.

If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure in this section. (Front impact sensor: refer to Removal and Installation, SRS-ECU: refer to Service and Repair, Air bag modules and clock spring: refer to Removal and Installation, Side-air bag module: refer to Front Seat Assembly Front Seat Assembly Removal and Installation, Side impact sensor: refer to Removal and Installation, Curtain air bag module:
refer to Removal and Installation, Seat belt with pre-tensioner: refer to Seat Belts With Pre-Tensioner).