With CONSULT

PROCEDURE




1. Turn on CONSULT and touch "A/T".
If A/T is not displayed, check A/T control unit power supply and ground circuit.




2 . Touch "SELF-DIAG RESULTS".
Display shows malfunction experienced since the last erasing operation.
CONSULT performs REAL-TIME SELF-DIAGNOSIS. Also, any malfunction detected while in this mode will be displayed at real time.

(Part A) Consult Screen Terms For Component Names:

(Part B) Consult Screen Terms For Component Names:

NOTE:
After performing this procedure, place check marks for results on a "DIAGNOSTIC WORKSHEET" for reference during overall vehicle diagnosis.