Self-Diagnostic Procedure (With CONSULT)

SELF-DIAGNOSTIC PROCEDURE (With CONSULT)
1. Turn on CONSULT and touch "A/T".
It A/T is not displayed, check A/T control unit power supply and ground circuit. Diagnostic Procedure 1 If result is NG, refer to ("POWER SUPPLY ROUTING"). Electrical Diagrams

(Part A) Consult Screen Terms For Component Names:

(Part B) Consult Screen Terms For Component Names:

2. Touch "SELF-DIAG RESULTS".
Display shows malfunction experienced since the last erasing operation.
CONSULT performs REAL-TIME SELF-DIAGNOSIS. Also, any malfunction detected while in this mode will be displayed at real time.