Displaying & Reading Trouble Codes

SELF-DIAG RESULTS MODE
Operation Procedure
1. Perform CONSULT-II SETTING PROCEDURE. Refer to RFD-52, CONSULT-II SETTING PROCEDURE. Scan Tool Connecting





2. With engine at idle, touch SELF-DIAG RESULTS. Display shows malfunction experienced since the last erasing operation.

NOTE:
^ The details for TIME are as follow:
^ 0: Error currently detected with differential lock control unit.
^ Except for 0: Error detected in the past and memorized with differential lock control unit. Detects frequency of driving after DTC occurs (frequency of turning ignition switch ON/OFF).