Pedal Adjusting Motor

PEDAL ADJUSTING MOTOR

Description

- The pedal adjusting motor is installed to the pedal adjusting motor assembly.
- The pedal adjusting motor is activated with the automatic drive positioner control unit.
- The pedal assembly is adjusted forward/backward by changing the rotation direction of pedal adjusting motor.


Component Function Check


1. CHECK FUNCTION

1.Select "PEDAL MOTOR" in "Active test" mode with CONSULT.
2.Check the pedal adjusting motor operation.





Is the operation of relevant parts normal?
YES- Inspection End.
NO- Perform diagnosis procedure. .


Diagnosis Procedure

Regarding Wiring Diagram information, [1][2]Electrical Diagrams.

1. CHECK PEDAL ADJUSTING MOTOR POWER SUPPLY






1.Turn the ignition switch OFF.
2.Perform "Active test" ("PEDAL MOTOR") with CONSULT.
3.Check voltage between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace pedal adjusting motor assembly. Service and Repair.
NO- GO TO 2

2. CHECK PEDAL ADJUSTING MOTOR CIRCUIT






1.Disconnect automatic drive positioner control unit and pedal adjusting motor assembly.
2.Check continuity between automatic drive positioner control unit harness connector and pedal adjusting motor assembly harness connector.





3.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- GO TO 3
NO- Repair or replace harness.

3. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
Is the inspection result normal?
YES- Replace automatic drive positioner control unit. Service and Repair.
NO- Repair or replace the malfunctioning part.