Front Door: Service and Repair

DOOR

Removal and Installation


CAUTION:
- When removing and installing a door assembly, support the door with a jack and shop cloth to protect the door and body.
- When removing and installing a door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating point for poor lubrication. If necessary, apply "body grease".

FRONT DOOR

Removal
1.Remove the front door glass and regulator. Service and Repair.
2.Remove the door harness.





3.Remove the check link bolt from the hinge pillar.





4.Remove the door-side hinge nuts, and the door assembly.










Installation
Installation is in the reverse order of removal.
- Align the front door. Adjustments.

REAR DOOR

Removal
1.Remove the door finisher. Service and Repair.
2.Remove the inner seal.
3.Remove the rear door glass and regulator. Service and Repair.
4.Remove the door harness.





5.Remove the check link bolt from the hinge pillar.





6.Remove the door-side hinge nuts, and remove the door assembly.










Installation
Installation is in the reverse order of removal.
- Align the rear door. Adjustments.

BACK DOOR

Removal
1.Remove the glass hatch.
2.Remove the back door lock assembly. Service and Repair.
3.Remove the back door wire harness.
4.Remove the rear washer nozzle and hose from the back door. Rear Washer Nozzle
5.Support the back door.
6.Remove the back door stays.
7.Remove the door side nuts and the back door assembly.

CAUTION:
Two technicians should be used to avoid damaging the back door during removal.





Installation
Installation is in the reverse order of removal.
- Align the back door. Adjustments.