Without Intelligent Key System

P1615 DIFFERENCE OF KEY

Description

Performs ID verification through BCM when ignition knob switch is pressed.
Prohibits the release of steering lock or start of engine when an unregistered ID of ignition key is used.


DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Insert ignition key into key cylinder.
2.Turn ignition knob switch.
3.Check "Self Diagnostic Result" with CONSULT.
Is DTC detected?
YES- Refer to"Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM INITIALIZATION

Perform initialization with CONSULT. Re-register all ignition keys.
Can the system be initialized and can the engine be started with re-registered ignition key?
YES- INSPECTION END (Ignition key was unregistered.)
NO-BCM is malfunctioning.
- Replace BCM. Refer to "Removal and Installation" Removal And Installation.
- Perform initialization again.