Parking Lamp: Service and Repair

PARKING, LICENSE PLATE AND TAIL LAMPS


Removal and Installation


PARKING LAMP
Refer to Removal and Replacement.

LICENSE PLATE LAMP-HATCHBACK






Removal
1. Press the license plate lamp pawl on the side of the rear bumper fascia, then swing the license plate lamp down to release the license plate lamp hook from the rear bumper fascia.
2. Disconnect the license plate lamp connector and remove the licence plate lamp.

Installation
Installation is in the reverse order of removal.

LICENSE PLATE LAMP-SEDAN

Removal
1. Remove the license plate lamp finisher. Refer to Trunk Room Trim & Trunk Lid Finisher.





2. Remove the license plate lamp assembly (1).

Installation
Installation is in the reverse order of removal.

TAIL LAMP
Refer to Removal and Replacement.