B177A

B177A ROOF STATUS INCORRECT





DTC Logic

DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, RF, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE
1.ADJUST SOFT TOP POSITION
1. Turn ignition switch OFF and wait at least 4 minutes.
2. Manually operate soft top to fully open.
- GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
1. Start engine.
2. Operate soft top to fully open and fully close.
3. Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT-III.
4. Check DTC.
Is DTC detected?
YES - Go to B177B.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK SOFT TOP SYSTEM COMPONENT
Check that soft top system component is installed normally and is not damaged.
Is the inspection result normal?
YES - INSPECTION END
NO - Repair or replace malfunctioning part.