B177B

B177B ROOF STATUS INCORRECT





DTC Logic

DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, RF, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE
1.ADJUST SOFT TOP POSITION
1. Turn ignition switch OFF and wait at least 4 minutes.
2. Manually operate soft top to fully open.
- GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
1. Start engine.
2. Operate soft top to fully open and fully close.
3. Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT-III.
4. Check DTC.
Is DTC detected?
YES - Go to B177B.
NO - INSPECTION END




Diagnosis Procedure
1.PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC Confirmation Procedure. B177B.
Is the DTC displayed again?
YES - Replace soft top control unit. Removal And Installation.
NO - INSPECTION END