B177C

B177C THERMO PROTECTION





DTC Logic

DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, RF, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE
1.COOL DOWN HYDRAULIC SYSTEM
Turn ignition switch off and wait at least 5 minutes.
- GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT-III.
3. Check DTC.
Is DTC detected?
YES - Go to B177C.
NO - INSPECTION END




Diagnosis Procedure
1.PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC Confirmation Procedure. B1701.
Is the DTC displayed again?
YES - Replace soft top control unit. Removal And Installation.
NO - INSPECTION END