B1701

B1701 ROOF CONTROL UNIT





DTC Logic

DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, RF, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT-III.
3. Check DTC.
Is DTC detected?
YES - B1701.
NO - INSPECTION END




Diagnosis Procedure
1.REPLACE SOFT TOP CONTROL UNIT
1. Turn ignition switch OFF.
2. Replace soft top control unit. Removal And Installation.
3. Perform DTC Confirmation Procedure. B1701.
- INSPECTION END