Base Audio

FRONT DOOR SPEAKER (SEDAN)


Description

The audio unit sends audio signals to the front door speakers using the door speaker circuits.





FRONT DOOR SPEAKER (SEDAN)


Diagnosis Procedure

Regarding Wiring Diagram information, refer to Base Audio.
1.HARNESS CHECK





1. Disconnect audio unit connector M85 (A) and suspect speaker connector (B).
2. Check continuity between audio unit harness connector M85 (A) terminal and suspect speaker harness connector (B) terminal.





3. Check continuity between audio unit harness connector M85 (A) terminal and ground.






Are continuity results as specified?
YES - GO TO 2
NO - Check connector housings for disconnected or loose terminals.
- Repair harness or connector.
2.FRONT DOOR SPEAKER SIGNAL CHECK
1. Connect audio unit connector and front speaker connector.
2. Turn ignition switch to ACC.
3. Push "POWER" switch.





4. Check the signal between audio unit harness connector terminals with CONSULT-III or oscilloscope.





Is the audio signal voltage as specified?
YES - Replace speaker. Refer to Base Audio.
NO - Replace audio unit. Refer to Base Audio.