Coupe

FLOOR TRIM


Removal and Installation


REMOVAL
1. Remove front seat (RH/LH) and rear seat cushion. Refer to Coupe (front seat) and Coupe (rear seat).
2. Remove door welt. Refer to Coupe.
3. Remove center console. Refer to Disassembly And Assembly.
4. Remove the diagnosis sensor unit. Refer to Service and Repair.
5. Remove front seat belt floor anchor bolt (RH/LH). Refer to Removal And Installation.
6. Remove lower rear finisher. Refer to Coupe
7. Remove support bracket.
8. Fold corners toward center, then remove floor carpet.

INSTALLATION
Installation is in the reverse order of removal.