ABS

BRAKE WARNING LAMP


Component Function Check

1.BRAKE WARNING LAMP OPERATION CHECK 1
Check that the lamp illuminates after the ignition switch is turned ON, and turns OFF after the engine is started.
Is the inspection result normal?
YES - GO TO 2
NO - Go to diagnosis procedure. Refer to ABS.
2.BRAKE WARNING LAMP OPERATION CHECK 2
Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the parking brake lever (M/T models) or the parking brake pedal (CVT models).
Is the inspection result normal?
YES - Inspection End.
NO - Check parking brake switch. Refer to Diagnosis Procedure.