B26F7
B26F7 BCM
Description
BCM (Body Control Module) controls the various electrical components. It inputs the information required to the control from CAN communication and the signal received from each switch and sensor.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Press door request switch.
2. Check "Self-diagnosis result" using CONSULT-III.
Is DTC detected?
YES - Go to B26F8.
NO - INSPECTION END
Diagnosis Procedure
1.INSPECTION START
1. Turn ignition switch ON.
2. Check "Self-diagnosis result" using CONSULT-III.
3. Touch "ERASE".
4. Perform DTC Confirmation Procedure.
See B26F8.
Is DTC detected?
YES - Replace BCM. Removal And Installation.
NO - INSPECTION END