With Intelligent Key System

FUEL FILLER LID OPENER


Removal and Installation


REMOVAL

FUEL FILLER LID
1. Fully open fuel filler lid.
2. Remove mounting screws, and then remove fuel filler lid.

FUEL FILLER LID OPENER CABLE
1. Fully open fuel filler lid.
2. Remove dash side finisher (LH). Removal And Installation.
3. Remove front kicking plate inner (LH). Removal And Installation.
4. Remove center pillar lower garnish (LH). Removal And Installation.
5. Remove rear kicking plate inner (LH). Removal And Installation.
6. Remove luggage side finisher (LH) (upper/lower). Removal And Installation.
7. Remove center seat belt retractor. Removal And Installation.
8. Remove mounting bolts, and then remove fuel filler lid opener handle.
9. Remove fuel filler lid opener cable from fuel filler lid opener handle.
10. Push fuel filler lid lock assembly front the vehicle, while pushing the pawls.
11. Remove fuel filler lid opener cable from fuel filler lid lock assembly.
12. Pull up floor trim. Removal And Installation.
13. Remove fuel filler lid opener cable mounting clips.
14. Remove fuel filler lid opener cable.

INSTALLATION
Install in the reverse order of removal.