Removal And Installation Coupe

BACK DOOR


BACK DOOR HINGE : Removal and Installation


REMOVAL
1. Remove back door assembly. Removal And Installation Coupe.
2. Remove luggage side finisher upper (LH/RH). Removal And Installation Coupe.
3. Remove rear pillar finisher (LH/RH). Coupe.
4. Remove clips of headlining at rear end. Removal And Installation Coupe.
5. Remove back door hinge mounting nuts (body side), and then remove back door hinge.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Check back door hinge rotating part for poor lubrication. If necessary, apply body grease.
- After installation, check back door open/close, lock/unlock operation.
- After installation, perform the fitting adjustment. Coupe.