Trunk Side Box Assembly

TRUNK ROOM TRIM

TRUNK SIDE BOX ASSEMBLY : Removal and Installation


REMOVAL

1.Fully open trunk lid assembly.
2.Remove trunk rear plate. Trunk Rear Plate.
3.Remove trunk finisher front. Trunk Finisher Front.
4.Remove trunk side finisher (LH and RH). Trunk Side Finisher.
5.Remove trunk side box assembly fixing clips.
6.Remove cover spare tire front from trunk side box assembly RH.
7.Remove trunk side box assembly.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
When installing, check that clips, pawls, metal clips are securely fitted in panel holes on body when installing, and then press them in.