Security Control System

REMOTE KEYLESS ENTRY RECEIVER

Removal and Installation


REMOVAL

1.Remove the front pillar upper finisher (RH). Front Pillar Finisher.
2.Remove the side ventilator grille (RH). Removal And Installation.
3.Remove the upper glove box. Service and Repair.
4.Remove cluster lid D. Removal And Installation.





5.Remove the remote keyless entry receiver bolt (A).
6.Disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

INSTALLATION

Installation is in the reverse order of removal.
- Perform TPMS ID registration. Work Procedure.