Work Flow

DIAGNOSIS AND REPAIR WORK FLOW

Work Flow


OVERALL SEQUENCE







DETAILED FLOW


1. COLLECT INFORMATION FROM THE CUSTOMER

Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnostic worksheet. Diagnostic Work Sheet.
- GO TO 2.

2. PERFORM SELF DIAGNOSTIC RESULT

Perform self diagnostic result. Scan Tool Testing and Procedures.
Are any DTCs displayed?
YES- Testing and Inspection.
NO- GO TO 3.

3. CHECK SYMPTOM OPERATING CONDITION

Check that the symptom is a normal operating condition. Normal Operating Condition.
Is the symptom a normal operating condition?
YES- Inspection End.
NO- GO TO 4.

4. CHECK WARNING AND INDICATOR LAMPS OPERATION

Check ABS and brake warning lamps, and VDC OFF and SLIP indicator lamps operation. Type A (type A) or Type B (type
B).
Is ON/OFF timing normal?
YES- GO TO 5.
NO- Perform warning lamp diagnosis. ABS Warning Lamp (ABS warning lamp), Brake Warning Lamp (brake warning lamp), VDC Off Indicator Lamp (VDC OFF indicator lamp) or Slip Indicator Lamp (SLIP indicator lamp).

5. PERFORM DIAGNOSIS APPLICABLE TO THE SYMPTOM

Perform diagnosis applicable to the symptom. VDC/TCS/ABS.
- GO TO 6.

6. FINAL CHECK

Perform self diagnostic result again, and check that the malfunction is repaired. After checking, erase the self diagnosis memory. Scan Tool Testing and Procedures.
- Inspection End.