Removal And Installation

SPARK PLUG

Removal and Installation


REMOVAL

1.Remove ignition coil. Removal And Installation.

CAUTION:
Never drop or shock ignition coil.





2.Remove spark plug using a suitable tool.
Diameter (a): 14 mm (0.55 in)

CAUTION:
Never drop or shock spark plug.

INSPECTION AFTER REMOVAL






- Do not use a wire brush for cleaning.
- If the spark plug tip is covered with carbon, a spark plug cleaner may be used.









- Checking and adjusting spark plug gap is not required between change intervals. Do not adjust the gap; replace the spark plug as necessary if out of specification.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Do not drop or shock the spark plug.