Removal And Installation

AIR CLEANER AND AIR DUCT

Removal and Installation


REMOVAL

1.Remove the core support cover. Refer to "Removal and Installation" Removal And Installation.
2.Remove front air duct.
3.Remove the engine room cover. Refer to "Removal and Installation" Removal And Installation.
4.Disconnect the air duct hose clamps at the electric throttle control actuator and the air cleaner case assembly.
5.Disconnect the blow-by hose.
6.Remove air duct hose and resonator.
7.Disconnect the mass air flow sensor and remove the harness retainers from the air cleaner case assembly.
8.Disconnect the transaxle breather hose from the air cleaner case assembly.
9.Remove mass air flow sensor from air cleaner case assembly, as necessary.

CAUTION:
Handle the mass air flow sensor with care:
- Do not shock it.
- Do not disassemble it.
- Do not touch the internal sensor.
10.Remove the air cleaner case assembly.

INSTALLATION

Installation is in the reverse order of removal.