Bulb Replacement - Xenon

FRONT COMBINATION LAMP

Bulb Replacement - Xenon


WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.

CAUTION:
- Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.
- Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.

HEADLAMP HIGH BEAM

Removal
1.Position the front fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.
2.Rotate the headlamp high beam socket counterclockwise and remove from front combination lamp.
Installation
Installation is in the reverse order of removal.

CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.

HEADLAMP LOW BEAM XENON


CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- HID control unit and xenon bulb socket cannot be disassembled.
Removal
1.Disconnect the battery negative terminal (xenon only). Refer to "Removal and Installation (Battery)" Removal And Installation.
2.Position the front fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.
3.Rotate the plastic cover counterclockwise and remove from the front combination lamp.
4.Rotate the xenon bulb socket counterclockwise and remove from xenon bulb.
5.Remove the retaining spring and the xenon bulb from the front combination lamp.

CAUTION:
Do not break the xenon bulb ceramic tube when replacing the bulb.
Installation
Installation is in the reverse order of removal.

CAUTION:
After installing the headlamp bulb, be sure to install the plastic cover securely to ensure watertightness.

SIDE MARKER LAMP

Removal
1.Position the front fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.
2.Rotate the side marker lamp bulb socket counterclockwise and remove.
3.Remove the side marker bulb from the front combination lamp.
Installation
Installation is in the reverse order of removal.

CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.