Body Control System

BCM (BODY CONTROL MODULE)

Removal and Installation


REMOVAL


CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description" Description.
1.Disconnect the negative battery terminal. Refer to "Removal and Installation (Battery)" Removal And Installation.
2.Remove the combination meter. Refer to "Removal and Installation" Service and Repair.





3.Remove the BCM screws (A) and pull out the BCM (1).
4.Disconnect the harness connectors from the BCM (1) and remove.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Be sure to perform "WRITE CONFIGURATION" when replacing BCM. Refer to "CONFIGURATION (BCM) : Description" Description.
- Be sure to perform the system initialization (NATS) when replacing BCM. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description" Description.
- When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be re-registered.