With Intelligent Key System

TRUNK LID

TRUNK LID HINGE : Removal and Installation


REMOVAL






1.Remove harness clips (A) from trunk lid hinge (RH only) (1).
2.Remove trunk lid assembly. Refer to "TRUNK LID ASSEMBLY : Removal and Installation" Removal And Installation.
3.Remove torsion bar. Refer to "TORSION BAR : Removal and Installation" With Intelligent Key System.
4.Remove rear parcel shelf finisher. Refer to "Removal and Installation" Removal And Installation.
5.Remove trunk lid hinge bolts (body side) and then trunk lid hinge.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installation, check trunk lid open/close, lock/unlock operation.
- After installation, perform the trunk lid adjustment procedure. Refer to "TRUNK LID ASSEMBLY : Adjustment" Adjustment.
- Apply touch-up paint (body color) onto the heads of trunk lid hinge bolts.





- Check trunk lid hinge rotating point for poor lubrication. If necessary, apply a suitable multi-purpose grease.