Removal And Installation

REAR PARCEL SHELF FINISHER

Removal and Installation


REMOVAL

1.Remove high-mounted stop lamp. Refer to "Removal and Installation" Removal And Installation.
2.Remove rear pillar finisher. Refer to "REAR PILLAR FINISHER : Removal and Installation" Rear Pillar Finisher.
3.Remove rear seat belt floor anchor bolts. Refer to "SEAT BELT RETRACTOR : Removal and Installation" Rear Seat Belt.





4.Release seat belt finisher pawls using a suitable tool (A) and remove seat belt finisher.
Broken circle indicates: Pawl
5.Fold rear seatbacks down (60:40 split seatback) or remove fixed seatback. Refer to "Removal and Installation Fixed Seatback" Fixed Seatback.
6.Remove seatback latch cover clips and seatback latch cover.





7.Remove rear parcel shelf finisher clips (A).





8.Pull rear parcel shelf finisher toward front and remove rear parcel shelf finisher.
Black arrow indicates: Front
9.Release anchor finisher pawls and remove anchor finishers and anchors from rear parcel shelf finisher (if necessary).

INSTALLATION

Installation is in the reverse order of removal.