Oil Pump Removal and Installation

REMOVAL
1. Disconnect battery ground cable and drain engine oil.
2. Remove crankshaft sprocket. Refer to Cylinder Block Assembly / Crankshaft Gear/Sprocket. Service and Repair
3. Remove timing belt rear cover. Refer to Timing Components / Timing Cover. Service and Repair
4. Disconnect engine oil pressure switch electrical connector from the switch.
5. Remove oil pan and oil filter.
6. Remove pickup tube to engine block bolts, pickup tube and oil pump.


INSTALLATION
1. Install gasket and oil pump onto engine. Torque oil pump bolts specifications.
2. Install pickup tube and bolts. Refer to Oil Strainer, Engine. Service and Repair
3. Install oil pan and oil filter.
4. Connect engine oil pressure switch electrical connector to switch.
5. Install timing belt rear covers and crankshaft sprocket.