Front Bumper Shock Absorber: Service and Repair

Energy Absorber Replacement - Front

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover


Removal Procedure





1. Remove the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper) .
2. Remove the plastic screws from the front energy absorber.




3. Remove the front bumper energy absorber from the front bumper fascia.



Installation Procedure





1. Position the front bumper energy absorber to the front bumper fascia.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the front bumper energy absorber screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper) .