G9.4 - G - Primer
G 9.4 G - Primer
G 9.4.1 Glasurit(R) 2C Primer 70-2
G 9.4.1.1 Processing
G 9.4.2 Glasurit(R) 1C Plastics Adhesion Primer 934-0
G 9.4.2.1 Processing
G 9.4.1 Glasurit(R) 2C Primer 70-2
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Water-dilutable 2C primer
Properties:
- Corrosion protection
- Adhesion primer in water build-up
- Contains max. 5% organic solvent
Base surfaces:
- Sheet steel
- Galvanized sheet steel
- Aluminum
- New parts primed ex-works
- Hardened old paintwork
NOTES:
- Do not use under polyester filler and polyester spray filler
- Do not use IR drying when applied under Glasurit(R) 1C Primer Filler 76-71
- Use Glasurit(R) Deionised Water and Glasurit(R) Cleaner 700-1 to clean the spray guns
- Collect washing water and treat with coagulating powder 700-7 in accordance with technical information
- Protect against frost
- Can be used directly unter Glasurit(R) Basecoat, water-based 90 line on areas sanded through to bare metal
VOC value:
- < 250 g/l
G 9.4.1.1 Processing
G 9.4.2 Glasurit(R) 1C Plastics Adhesion Primer 934-0
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Universal adhesion primer for all paintable plastics in passenger vehicles
Properties:
- Good and fast sanding properties
Base surfaces:
Soft plastics:
- PUR
- Polyurethane integral foam (soft)
Hard plastics:
- PUR Polyurethane RIM/R-RIM
- PP/EPDM Polypropylene/ethylene-propylene-diene monomer
- ABS Acryl-butadien-styrene
- GFK Glass fiber-reinforced plastic
- GF-UP Glass fiber-reinforced polyester
- SMC Sheet Molding Compound
- BMC Bulk Molding Compound
- PVC Hard polyvinyl chloride
- PC Polycarbonate
- PA Polyamide
- PBTP Polybutylene terephtalate
- PPO Polyphenylene oxide (Noryl)
Non-paintable:
- PP/PE Polypropylene/polyethylene
- PVC Soft polyvinyl chloride
NOTE:
- Bake PUR foam and PA (1h/60° C) to remove parting agents or water completely from the pores, then clean thoroughly with Glasurit(R) Universal Cleaner for Plastics 541-30
- The material must be cleaned thoroughly with Glasurit(R) Universal Cleaner for Plastics 541-30
VOC value:
- > 420 g/l
G 9.4.2.1 Processing
G9.5 - GF - Primer Surfacer