Multifunction Turn Signal Switch Housing Replacement

Multifunction Turn Signal Switch Housing Replacement

Removal Procedure





1. Remove the inflatable restraint steering wheel module coil (3). Refer to Inflatable Restraint Steering Wheel Module Coil Replacement (Removal and Replacement).
2. Disconnect any electrical connectors as needed.
3. Release and remove the multifunction turn signal switch housing (2) from the steering column (1).
4. Transfer any parts as needed.



Installation Procedure





1. Install and secure the multifunction turn signal switch housing (2) to the steering column (1).
2. Connect any electrical connectors as needed.
3. Install the inflatable restraint steering wheel module coil (3). Refer to Inflatable Restraint Steering Wheel Module Coil Replacement (Removal and Replacement).