LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1991 >> Legacy Sedan 4WD F4-2.2L SOHC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Relays and Modules - Ignition System >> Ignition Control Module >> Testing and Inspection

Ignition Control Module: Testing and Inspection

The ignitor is a solid state component. Unit testing is not possible. Refer to the schematic diagram and test system with diagnostic chart. If circuit tests OK, replace ignitor.
Testing and Inspection
scientia non olet · About LEMON Manuals