Read Current Data

READ CURRENT DATA

1. On the [[Main Menu]] display screen, select the (Each System Check) and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the (Transmission Control System) and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the [[Transmission Diagnosis]] display screen, select the (Current Data Display & Save) and press the [YES] key.
5. On the [[Transmission Diagnosis]] display screen, select the (Data Display) and press the [YES] key.
6. Using the scroll key, scroll the display screen up or down until the desired data is shown.
^ A list of the support data is shown in the following table.





NOTE: For details concerning the operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".