Keyless Entry: Testing and Inspection
Keyless Entry SystemINSPECTION
1. SYMPTOM CHART
Symptom Chart (Part 1):
Symptom Chart (part 2):
2. CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION
CAUTION: Be sure to reset keyless transmitter of other vehicles registered to the inspection target vehicle, and vehicles to which keyless transmitters were registered for inspection, to the condition before performing the inspection. (Re-register the keyless transmitters.)
Step 1-4:
3. CHECK KEYLESS ENTRY CONTROL MODULE
Step 1-4:
4. CHECK BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT
Refer to the INSPECTION of POWER SUPPLY AND GROUND CIRCUIT of the Door Lock Control System for detailed procedures. Testing and Inspection
5. CHECK DOOR SWITCH
Step 1-4:
Step 5:
6. CHECK KEY WARNING SWITCH
Step 1-6:
7. CHECKROOM LIGHT OPERATION
Step 1-5:
8. CHECK HAZARD LIGHT OPERATION
Step 1-3:
9. CHECK KEYLESS BUZZER
Step 1-5:
10. CHECK DOOR LOCK SWITCH
For operation procedure, refer to the door lock switch inspection of the door lock control system. Testing and Inspection
11. CHECK IGNITION SWITCH ILLUMINATION
Step 1-6:
