Keyless Entry: Testing and Inspection
Keyless Entry SystemINSPECTION
1. SYMPTOM CHART
2. CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION
CAUTION: Be sure to reset keyless transmitter of other vehicles registered to the inspection target vehicle, and vehicles to which keyless transmitters were registered for inspection, to the condition before performing the inspection. (Re-register the keyless transmitters.)
3. CHECK KEYLESS ENTRY CONTROL MODULE
4. CHECK BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT
Refer to the "INSPECTION of POWER SUPPLY AND GROUND CIRCUIT" of "Door Lock Control System" for detailed procedures. Testing and Inspection
5. CHECK DOOR SWITCH
6. CHECK KEY WARNING SWITCH
7. CHECK ROOM LIGHT OPERATION
8. CHECK HAZARD LIGHT OPERATION
9. CHECK KEYLESS BUZZER
10. CHECK DOOR LOCK SWITCH
For operation procedures, refer to the "INSPECTION OF DOOR LOCK SWITCH" of the "Door Lock Control System". Testing and Inspection
11. CHECK IGNITION SWITCH ILLUMINATION
