Installation

LIGHTING: STOP LIGHT SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STOP LIGHT SWITCH ASSEMBLY






(a) Temporarily install the stop light switch assembly with the stop light switch lock nut.






(b) Turn the stop light switch assembly so that the clearance between the nut end and stop light switch cushion is between 0.5 to 2.4 mm (0.020 to 0.095 in.).
(c) Tighten the stop light switch lock nut.
Torque: 17 Nm (173 kgf-cm, 12 ft-lbf)






(d) Connect the connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation Part 1, Step 1-65

4. INSTALL FRONT DOOR SCUFF PLATE LH Installation Part 1, Step 1-65