Removal

1GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE Technician Safety Information
2. DRAIN ENGINE COOLANT Service and Repair
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. REMOVE V-BANK COVER Removal
5. REMOVE AIR CLEANER ASSEMBLY Removal
6. REMOVE INTAKE AIR SURGE TANK Removal
7. DISCONNECT FUEL PIPE SUB-ASSEMBLY NO.2 Removal





8. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
(a) Disconnect the connector.
(b) Using a 19 mm deep socket wrench, remove the water temperature sensor and gasket.