Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

INSTALLATION





1. INSTALL TIRE PRESSURE WARNING ECU
(a) Install the tire pressure warning ECU with the 2 screws.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connector.
2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY Installation
3. INSTALL LOWER INSTRUMENT PANEL LH Installation
4. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH Installation
5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
6. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY Installation
7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
8. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Installation
9. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Reassembly
10. INSTALL RADIO RECEIVER ASSEMBLY Installation
11. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
12. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) Installation
13. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) Installation
14. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) Installation
15. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) Installation
16. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) Installation
17. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Installation
18. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) Installation
19. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Installation
20. INSTALL INSTRUMENT PANEL HOLE COVER (for Manual Transmission) Installation
21. INSTALL INSTRUMENT PANEL UNDER TRAY (for Automatic Transmission) Installation
22. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab)
23. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab) Installation
24. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab) Installation
25. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)
26. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab) Installation
27. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab) Installation
28. INSTALL FRONT FLOOR FOOTREST Installation
29. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
Service Precautions
30. REGISTER TRANSMITTER ID
(a) Register the transmitter ID Registration.
31. PERFORM INITIALIZATION (for Tire Pressure Warning System)
(a) When the ECU is replaced, perform initialization Initialization.