Installation

OTHER SYSTEM: POWER OUTLET SOCKET: INSTALLATION

INSTALLATION

1. INSTALL POWER POINT SOCKET ASSEMBLY
(a) Align the socket with the notch on the power point socket cover, and push the power point socket assembly firmly into the cover to install it.
2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY Installation
3. INSTALL LOWER INSTRUMENT PANEL LH Installation
4. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY Installation
5. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Installation
7. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Reassembly
8. INSTALL RADIO RECEIVER ASSEMBLY Installation
9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
10. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) Installation
11. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) Installation
12. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) Installation
13. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) Installation
14. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) Installation
15. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Installation
16. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) Installation
17. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Installation
18. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) Installation
19. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) Installation
20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)