Disassembly
ENGINE HOOD / DOOR: BACK DOOR: DISASSEMBLY
1. REMOVE SPARE WHEEL NO. 2 COVER (w/ Rear Monitor)
2. REMOVE SPARE WHEEL COVER (w/ Rear Monitor)
3. REMOVE SPARE WHEEL CARRIER NO. 2 BRACKET (w/ Rear Monitor)
(a) Remove the 2 bolts and remove the spare wheel carrier No. 2 bracket.
(b) Disconnect the connector.
4. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor) Removal
5. REMOVE SPARE DISC WHEEL
6. REMOVE BACK DOOR OUTSIDE MOULDING LH Removal
7. REMOVE BACK DOOR OUTSIDE MOULDING RH Removal
8. REMOVE SPARE WHEEL CARRIER BRACKET SUB-ASSEMBLY
(a) Remove the 2 bolts and 2 nuts and remove the spare wheel carrier bracket.
9. REMOVE SPARE WHEEL CARRIER BRACKET SUB-ASSEMBLY (w/ Rear Monitor)
(a) Remove the 2 bolts and 2 nuts and remove the spare wheel carrier bracket.
10. REMOVE BACK DOOR TRIM COVER RH
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the back door trim cover.
11. REMOVE BACK DOOR TRIM COVER LH
HINT
Use the same procedure as described for the RH side.
12. REMOVE DOOR TRIM RETAINER CAP
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the door trim retainer cap.
13. REMOVE BACK DOOR TRIM BOARD
(a) Remove the 2 screws.
(b) Disengage the 16 clips and remove the back door trim board.
14. REMOVE BACK DOOR SERVICE HOLE COVER
(a) Remove the back door service hole cover.
NOTICE:
Remove any tape remaining on the door side.
15. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper) Removal
16. REMOVE REAR WIPER MOTOR (w/ Rear Wiper) Removal
17. REMOVE REAR WIPER MOTOR GROMMET (w/ Rear Wiper)
18. REMOVE MULTIPLEX NETWORK DOOR ECU
(a) Disconnect the 2 connectors and harness clamp.
(b) Remove the 2 screws and the multiplex network door ECU.
19. REMOVE BACK WINDOW LOCK ASSEMBLY Removal
20. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
21. REMOVE BACK DOOR LOCK ASSEMBLY Removal
22. REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY
(a) Disconnect the connector and the 2 clamps.
(b) Remove the retainer and the back door lock cylinder.
23. REMOVE NO. 1 REAR SPOILER COVER
(a) Remove the 4 screws and No. 1 rear spoiler cover.
24. REMOVE REAR SPOILER Removal
25. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY Disassembly
26. REMOVE BACK DOOR SIDE FEMALE STOPPER SUB-ASSEMBLY
(a) Remove the 2 bolts and back door side female stopper.
27. REMOVE BACK WINDOW SUPPORT LH Removal
28. REMOVE BACK WINDOW SUPPORT RH
HINT
Use the same procedure as described for the LH side.
29. REMOVE BACK DOOR GLASS Removal
30. REMOVE BACK WINDOW STAY UPPER BRACKET RH Removal
31. REMOVE BACK WINDOW STAY UPPER BRACKET LH
HINT
Use the same procedure as described for the RH side.
32. REMOVE BACK WINDOW LOCK STRIKER ASSEMBLY Removal
33. REMOVE BACK DOOR OUTSIDE HANDLE Removal
34. REMOVE BACK DOOR HINGE ASSEMBLY RH
(a) Remove the bolt and the back door hinge.
35. REMOVE BACK DOOR HINGE ASSEMBLY LH
HINT
Use the same procedure as described for the RH side.
36. REMOVE NO. 2 BACK DOOR WEATHERSTRIP
(a) Remove the No. 2 back door weatherstrip.
NOTICE:
Remove any tape remaining on the door side.
37. REMOVE BACK DOOR STAY UPPER BRACKET RH
(a) Remove the bolt and the back door stay upper bracket.
38. REMOVE BACK DOOR STAY UPPER BRACKET LH
(a) Remove the bolt and the back door stay upper bracket.
39. REMOVE BACK DOOR SUPPORT Removal
40. REMOVE BACK DOOR DAMPER STAY LOWER BRACKET
(a) Remove the 2 bolts and the back door damper stay lower bracket.
41. REMOVE NO. 1 BACK DOOR NAME PLATE Removal
42. REMOVE NO. 2 BACK DOOR NAME PLATE Removal
43. REMOVE REAR NAME PLATE Removal
44. REMOVE CUSHION
(a) Remove the 2 cushions.
45. REMOVE HOLE PLUG
(a) Remove the 2 hole plugs.