Installation

ENGINE HOOD / DOOR: FUEL LID COURTESY SWITCH: INSTALLATION

1. INSTALL FUEL FILLER OPENING LID LOCK SUB-ASSEMBLY

(a) Engage the clamp and temporarily install the fuel lid courtesy switch.





(b) Connect the connector.

(c) Install the fuel lid courtesy switch with the nut from the outside the vehicle.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL BACK DOOR SERVICE HOLE COVER LH Reassembly

3. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY Reassembly

4. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation

5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation

6. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH Installation

7. INSTALL FRONT DECK SIDE TRIM COVER LH Installation

8. INSTALL NO. 2 DECK SIDE TRIM HOOK Installation

9. INSTALL ROPE HOOK ASSEMBLY Installation

10. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH Installation

11. INSTALL REAR POWER OUTLET SOCKET COVER Installation

12. INSTALL REAR POWER POINT SOCKET ASSEMBLY Installation

13. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation

14. INSTALL SIDE TRIM COVER LH (w/o Rear Seat Entertainment System) Installation

15. INSTALL POWER OUTLET SOCKET BEZEL (w/ Rear Seat Entertainment System) Installation

16. INSTALL DECK SIDE TRIM LH Installation

17. INSTALL DECK SIDE TRIM COVER LH Installation

18. INSTALL REAR FLOOR FINISH PLATE Installation

19. INSTALL REAR NO. 2 SEAT ASSEMBLY Installation

20. CONNECT CENTER SEAT CUSHION COVER SUB-ASSEMBLY Installation

21. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH Installation

22. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH Installation

23. INSTALL REAR DECK FLOOR BOX Installation

24. INSTALL REAR MAT Installation

25. INSTALL DECK SIDE TRIM BOX RH Installation

26. INSTALL JACK CARRIER ASSEMBLY Installation

27. INSTALL JACK ASSEMBLY Installation

28. INSTALL JACK CARRIER CUSHION Installation

29. INSTALL JACK CARRIER SUPPORT Installation

30. INSTALL NO. 1 DECK BOARD Installation

31. INSTALL NO. 2 DECK BOARD Installation

32. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY Installation

33. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

34. INSTALL BATTERY SERVICE HOLE COVER ASSEMBLY Installation

35. INSTALL DECK BOARD ASSEMBLY Installation

36. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation

37. INSTALL REAR DOOR SCUFF PLATE LH Installation